The Electronic Technical Officer reports to and is the deputy of the Chief Engineer

Function requirements
* Bachelor of Science degree in Electronics, or electronic education to middle and higher level (HTS/MTS level);
* Minimum of 2 years experience on board Dynamically Positioned (DP) offshore construction vessels;
* Minimum of 2 years experience on seagoing vessels;
* Good command of the English language, both written and spoken;
* Practical experience with MS Office.

Responsibilities, Accountabilities and Authorities:
* Responsible for carrying out maintenance and repairs on all electrical and electronical equipment onboard the unit;
* Carry out maintenance and repairs on the electric and electronic installation onboard.
* Maintaining essential electrical services in case of an emergency.
* Ensure that proper electrical logs are kept.
* Responsible for proper functioning of the jacking system and review of all relevant documentation.
* Pre-load the unit in a correct manner to the satisfaction of the Warranty Surveyor.
* Ensure that the jacking system is shut down and left in a safe manner after completion of the jacking operation.
* Report on spare parts used and articles required.
* Daily routines and maintenance per checklists; ensure that applicable installations and equipment are in compliance with regulations.
* The ETO shall ensure availability of sufficient equipment for safest conduct of the work and constantly be aware of safe working conditions.
* In case of rig-moves, advice the OIM of all the technical information to be included in the rig move report.
* The ETO shall specifically comply with the requirements of the NEN 3140 standard second revision, and associated regulations.